Suzuki Grand Vitara: Seat Adjustment

Suzuki Grand Vitara / Suzuki Grand Vitara 2nd Gen Owner's Manual / Before Driving / Seat Adjustment

the driver’s seat or seatback while driving. The seat or seatback could move unexpectedly, WARNING: Never attempt to adjust the driver’s seat or seatback while driving. The seat or seatback could move unexpectedly, causing loss of control. Make sure that the driver’s seat and seatback are properly adjusted before you start driving.

belt slack, which reduces the effectiveness of the seat belts as a safety device, WARNING: To avoid excessive seat belt slack, which reduces the effectiveness of the seat belts as a safety device, make sure that the seats are adjusted before the seat belts are fastened.

Adjusting Seat Position

The adjustment lever for each front seat is located under the front of the seat.
Front seat

The adjustment lever for each front seat is located under the front of the seat. To adjust the seat position, pull up on the adjustment lever and slide the seat forward or rearward. After adjustment, try to move the seat forward and rearward to ensure that it is securely latched.

If the driver’s seat is equipped with a seat height adjuster lever on the outboard

If the driver’s seat is equipped with a seat height adjuster lever on the outboard side of the seat, raise or lower the seat by pulling up or down the adjuster lever.

Adjusting Seatbacks

always be in an upright position when driving, or seat belt effectiveness may be WARNING: All seatbacks should always be in an upright position when driving, or seat belt effectiveness may be reduced. Seat belts are designed to offer maximum protection when seatbacks are in the upright position.

To adjust the seatback angle of front seat, pull up the lever on the outboard
Front seat

To adjust the seatback angle of front seat, pull up the lever on the outboard side of the seat, move the seatback to the desired position, and release the lever to lock the seatback in place.

To adjust the seatback angle of the rear seats: 1) Pull up the lever on the top
Rear seat

To adjust the seatback angle of the rear seats: 1) Pull up the lever on the top of a split folding seat. 2) Move the seatback to one of the lock positions. The number of the lock positions depends on the vehicle specification. 3) Release the lever to lock the seatback in position. After adjustment, try moving the seatback to make sure it is securely locked.

Mirrors
Head Restraints

See also:


Air filtration system
Replace the filter element according to the replacement schedule as follows. This schedule should be followed to maintain the filter’s dust collection ability. Under extremely dusty conditions, the filter should be replaced more frequentl ...

Around viewTM monitor (if equipped)
The CAMERA button is located on the center console. When you push the CAMERA button or shift the selector lever into the “R” (Reverse) position while the ignition switch is in the ON position, the Around View Monitor operates. The moni ...