Suzuki Grand Vitara: Mirrors
Inside Rearview
Mirror
Inside Rearview
Mirror
You can adjust the inside rearview mirror by hand so as to see the rear of your vehicle in the mirror. To adjust the mirror, set the selector tab (1) to the day position, then move the mirror up, down or sideways by hand to obtain the best view. When driving at night, you can move the selector tab to the night position to reduce glare from the headlights of vehicles behind you.
WARNING:
• Always adjust the mirror with the selector set to the day position.
• Only use the night position if it is necessary to reduce glare from the headlights
of vehicles behind you. Be aware that in this position you may not be able to see
some objects that could be seen in the day position.
Outside Rearview
Mirrors
Adjust the outside rearview mirrors so you can just see the side of your vehicle in the mirrors. The passenger’s side mirror is a convex (curved surface) mirror. Objects seen in this mirror will look smaller and appear farther away than when seen in a flat mirror.
WARNING: Be careful when judging
the size or distance of a vehicle or other object seen in the side convex mirror.
Be aware that objects look smaller and appear farther away than when seen in a flat
mirror.
Power Mirror Control
(if equipped)
The switch to control the power rearview mirrors is located on the driver’s door panel. You can adjust the mirrors when the ignition switch is in the “ACC” or “ON” position. To adjust the mirrors: 1) Move the selector switch to the left or right to select the mirror you wish to adjust. 2) Press the outer part of the switch that corresponds to the direction in which you wish to move the mirror. 3) Return the selector switch to the center position to help prevent unintended adjustment.
See also:
Hazard Warning Flashers
The Hazard Warning flasher switch is located in the
switch bank below the climate controls.
Press the switch to turn on the Hazard Warning
flasher. When the switch is activated, all directional
turn signals will flash on and off to warn onco ...
Windshield defrosting and defogging
Manual climate control system To defog inside windshield 1. Select any fan speed
except “0”. 2. Select desired temperature. 3. Select the or position. 4. The outside
(fresh) air position is automatically selected. If the outside (fresh) air ...